top of page
Writer's pictureTeam Carports and Outdoors

The Process of installing a Patio & Pergola kits.

To install an aluminum patio kit, you will need to gather the necessary tools and materials, such as a level, measuring tape, drill, screws, and a saw. Once you have everything you need, you can follow these basic steps:

  1. Prepare the area: Make sure the ground where you will be installing the patio kit is level and clear of any debris.

  2. Lay out the pieces: Place the aluminum pieces on the ground in the configuration you want to build.

  3. Measure and mark: Measure and mark the locations where you will need to drill holes for the dynabolts/screws.

  4. Drill holes: Use a drill to create the holes you marked in the previous step.

  5. Assemble the pieces: Start assembling the patio kit by attaching the pieces to each other using screws.

  6. Secure the pieces: Tighten all the screws to ensure a secure and stable assembly.

  7. Check level: use a level to ensure that the patio is level and make any necessary adjustments.

It's always recommended to follow the instructions that come with the patio kit, as different manufacturers may have slightly different instructions.





Commenti


bottom of page